EVALUATION KIT FOR MODELS PAD112, PAD113
The EVAL112 evaluation kit provides a convenient method to become familiar with the operation of amplifier models PAD112 and PAD113 before your application circuit is committed to production. Some assembly is required since user selections are needed depending on the application. For example, a current limit resistor value needs to be selected by the user. Also, there are several PCB mounting options available.
Evaluation Kit for 117A Rail to Rail Power Op Amp
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons and BNC input signal jack. The PCB can be mounted to a 35mm DIN rail using the included adaptors. The PCB includes sockets to install the optional PAD125 Current Limit Accessory Module as well as the PAD131 Fan Controller Accessory Module. The amplifier and accessory modules are purchased separately. Assembled kit with PAD117A installed is shown as well as the optional DIN rail mounting and accessory modules.
Evaluation Kit for PAD115, 118, 119 High Power Op Amps
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, heat sink for the current limit resistors, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. The kit can be optionally mounted to a 35mm DIN rail with the included adaptors. The PCB includes sockets to install the PAD125 Current Limit Accessory Module and the PAD131 Fan Controller Accessory Module. The amplifier and accessory modules are purchased separately. Assembled kit with amplifier and accessory modules installed is shown and PCB is mounted on a 35mm DIN rail.
Evaluation Kit for PAD126 High Voltage Power Op Amp
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, heat sink for the current limit resistors, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. The kit can be optionally mounted to a 35mm DIN rail with the included adaptors. The PCB includes sockets to install the PAD125 Current Limit Accessory Module and PAD131 Fan Controller Accessory Module. The amplifier and accessory modules are purchased separately. Assembled kit shown with PAD126 mounted and optional accessory modules PAD125 and PAD131 installed.
Evaluation Kit for PAD129 High Voltage Op Amps
The EVAL129 assembled evaluation kit provides a convenient method to become familiar with the operation of the PAD128 and PAD129 operational amplifiers before your application circuit is committed to production. Some assembly is required since some user selections are needed depending on the application. For example, a current limit resistor value needs to be selected by the user. Also, there are several PCB mounting options available.
Evaluation Kit for PAD135 & PAD183 Compact High Voltage Op Amps
The assembled evaluation kit includes a PCB, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. The kit can be optionally mounted to a 35mm DIN rail (not included). Assembled kit shown with the amplifier installed. Amplifiers are purchased separately.
Evaluation Kit for PAD137 High Voltage Op Amps
The EVAL137 evaluation kit provides a convenient method to become familiar with the operation of amplifier model PAD137 before your application circuit is committed to production. Some assembly is required since user selections are needed depending on the application. For example, a current limit resistor value needs to be selected by the user. Also, there are several PCB mounting options available.
Fan Controller Module
- LOW COST ACCESSORY
- REDUCES AUDIBLE FAN NOISE
- INCREASES FAN LIFE
- CONVENIENT SIP PIN-OUT
- OPERATES FROM 12-15 VOLTS
- COMPATIBLE WITH ALL AMPLIFIER MODELS w/TEMP OUTPUT
Evaluation Kit for PAD138/141 Compact High Voltage Op Amp
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons and BNC input signal jack. The PCB can be mounted to a 35mm DIN rail using the included adaptors. The amplifier is purchased separately. Assembled kit with PAD138 or PAD141 installed is shown.